Fortinetthai.com
Fortinet Products => Fortigate => ข้อความที่เริ่มโดย: Sathit-Aun ที่ 11 มี.ค. 19, 10:24:01น.
-
รบกวนครับ ผมใช้ Fortigate 200D firmware v5.4.5 ต้องการ Config Link Health Monitor แต่หาไม่เจอครับ
ถ้าเป็นเวอร์ชั่น 5.2 จะอยู่ในเมนู Router---Setting ครับ แต่ 5.4.5 ไม่รู้ต้องไป Set ตรงไหนครับ
รบกวนแนะนำด้วยครับ
-
ถ้าเวอร์ชั่น 5.4 เป็นต้นไป เมนู Enable Link Health Monitor จะถูกตัดออกไปจาก WebGUI ครับ
จะต้องใช้คำสั่ง CLI ใช้งานครับ
config system link-monitor
edit "gwdetect-upg-1"
set srcintf "wan1"
set server "8.8.8.8"
set timeout 5
set recoverytime 1
next
end